Call us now :07971549307
Send Inquiry
Send InquiryToluene Diisocyanate
Toluene Diisocyanate Specification
- Density
- 1.22 Gram per cubic centimeter(g/cm3)
- Poisonous
- YES
- Purity
- Typically 99% or higher
- Ingredients
- Toluene-based diisocyanate mixture
- Usage
- Industrial chemical used in manufacturing processes
- Physical Form
- Clear to pale yellow liquid
- Solubility
- Insoluble in water; soluble in organic solvents such as acetone benzene and toluene
- CAS No
- 26471-62-5
- Ph Level
- Not applicable (non-aqueous compound)
- Molecular Weight
- 174.16 g/mol
- Melting Point
- 21-22C
- EINECS No
- 247-722-4
- Molecular Formula
- C9H6N2O2
- Shelf Life
- Typically 6-12 months if stored properly
- Refractive Rate
- 1.566
- Storage
- Store in a cool dry well-ventilated area away from heat moisture and incompatible substances
- Smell
- Sharp pungent chemical odor
- Shape
- Liquid form
- Grade
- Industrial grade
- Structural Formula
- OCN-C6H3-(CH3)-NCO
- HS Code
- 2929.10.10
- Properties
- Highly reactive toxic flammable and capable of polymerization
- Application
- Used in the production of polyurethane materials such as foams coatings adhesives and elastomers
- Appearance
- Clear to pale yellow liquid
About Toluene Diisocyanate
TDI is used in foam industries.
Tell us about your requirement
Price:
Quantity
Select Unit
- 50
- 100
- 200
- 250
- 500
- 1000+
Additional detail
Mobile number
Email
More Products in Petrochemicals Category
Acetone
Usage : Laboratory reagent, industrial solvent, cleaning agent, nail polish remover
Purity : 99.5% min
Ingredients : Acetone (Propanone)
Molecular Weight : 58.08 g/mol
CAS No : 67641
Ph Level : Neutral (7, in dilute solution)
Methyl Alcohol
Usage : Industrial solvent fuel for alcohol stoves and antifreeze for windshield washers
Purity : 99.9%
Ingredients : 100% Methyl Alcohol
Molecular Weight : 32.04 g/mol
CAS No : 67561
Ph Level : 6.5 7.5
Polyester Polyol
Usage : Raw material for manufacturing polyurethanes and resins
Purity : >95% (typical)
Ingredients : Polyols adipic acid isophthalic acid and other monomers
Molecular Weight : Varies depending on the formulation (e.g. 3003000 g/mol)
CAS No : 3577784 (example for one type of polyester polyol varies)
Ph Level : Neutral (around 7)
Morpholine
Usage : Commonly utilized in industries such as rubber manufacturing agriculture chemicals and personal care products
Purity : Typically 99% or more
Ingredients : Morpholine (pure compound)
Molecular Weight : 87.12 g/mol
CAS No : 110918
Ph Level : Approximately 9.5 (10% aqueous solution)
Send InquiryOur Products
7/1, Lords Building, Room No. 506, Lord Sinha Road, Kolkata - 700071, West Bengal, India
Mr Raghav Goenka
(Director )
Mobile :07971549307
Send Inquiry
Send SMS
Developed and Managed by Infocom Network Private Limited.
